A Better Kiteboarding Pump

Post general kiteboarding discussion topics here!
User avatar
sc-surfer
Resident
Resident
Posts:740
Joined:Fri Apr 29, 2011 11:19 pm
Location:Santa Cruz
Contact:
A Better Kiteboarding Pump

Post by sc-surfer » Mon Dec 12, 2011 12:55 pm

I use a Teflon based lube that is specifically made for plastics. Specifically plastic gear boxes etc. Should be able to find it at a good hardware or hobby store. It is harmless for most plastics/rubbers. Never had it hurt anything.

The silicone should be ok to but the propellant in the can might be harmful.

User avatar
WindMuch
Site CoAdmin
Site CoAdmin
Posts:1010
Joined:Tue Apr 20, 2010 10:12 pm
Location:Oakland
Contact:

Re: A Better Kiteboarding Pump

Post by WindMuch » Mon Dec 12, 2011 1:02 pm

Aha!
The silicone should be ok to but the propellant in the can might be harmful.
Thanks, Monte! I was wondering WTF was up with my silicone spray eating rubber seals!

What brand/product is the teflon stuff you're using? Triflow?

Kirk out

maxsteamer
Regular
Regular
Posts:578
Joined:Tue Jul 05, 2005 12:01 am
Location:Max,s Launch
Contact:

Re: A Better Kiteboarding Pump

Post by maxsteamer » Tue Dec 13, 2011 2:20 am

Sunchips....you Da/Man

It's all about your form/and a well maintained pump...The best thing you can do for your session and yourself is lay out your lines first (key) this way your bending over to grab your lines and walking up and down the beach ..then put on your wetsuit (key) this works the back and legs if you ware booties that is a bit of a workout.. now your warmed up to pump up your kite.

Before you hook up the hose to the kite .. take a good look at it (key) and pull the stem up and down.. a few times.. no not that one.. just make sure it is working right ? if not don,t use it !! ask a bro if you can use there pump ? wait (Stop) take the time to make sure there pump is working correctly.. if that one is not working get the hell out of there the wind gods are trying to tell you something..? :o ?

I'm just kidding of course.. but to make a point, it only takes a second to tweak your back and then it's over anyway...take my word on this.. I live across the street from a launch and I have seen this many times can't miss it ..hand on back bro carrying the gear.. do your squats over the pump so you don't get glued in the prone position.. you never want this to happen on a 20+ day so take this post as a clue for you to kite your ass off or until your so stoked that you can't get that silly smile off your face.


Max be with you " :pray: " do your squats/or get glued/ its up to you.
http://www.cautionkites.com

Zombie
Spitfire
Trespass
DaKine
O'Neill

User avatar
kitenaked
Old School
Old School
Posts:1836
Joined:Mon Jun 18, 2007 4:57 pm
Location:Nor Cal
Contact:

Re: Re: A Better Kiteboarding Pump

Post by kitenaked » Tue Dec 13, 2011 6:55 pm

maxsteamer wrote:Sunchips....you Da/Man

It's all about your form/and a well maintained pump...The best thing you can do for your session and yourself is lay out your lines first (key) this way your bending over to grab your lines and walking up and down the beach ..then put on your wetsuit (key) this works the back and legs if you ware booties that is a bit of a workout.. now your warmed up to pump up your kite.

Before you hook up the hose to the kite .. take a good look at it (key) and pull the stem up and down.. a few times.. no not that one.. just make sure it is working right ? if not don,t use it !! ask a bro if you can use there pump ? wait (Stop) take the time to make sure there pump is working correctly.. if that one is not working get the hell out of there the wind gods are trying to tell you something..? :o ?

I'm just kidding of course.. but to make a point, it only takes a second to tweak your back and then it's over anyway...take my word on this.. I live across the street from a launch and I have seen this many times can't miss it ..hand on back bro carrying the gear.. do your squats over the pump so you don't get glued in the prone position.. you never want this to happen on a 20+ day so take this post as a clue for you to kite your ass off or until your so stoked that you can't get that silly smile off your face.


Max be with you " :pray: " do your squats/or get glued/ its up to you.

If your pump is not working, find Ollies bag...
Chris

Kite Naked
Benicia Kite and Paddle Sports
4562 East 2nd Street, Unit J & K
Benicia, CA 94510

209-304-2200

http://www.kitenaked.com
Slingshot

User avatar
kitenaked
Old School
Old School
Posts:1836
Joined:Mon Jun 18, 2007 4:57 pm
Location:Nor Cal
Contact:

Re: A Better Kiteboarding Pump

Post by kitenaked » Wed Dec 14, 2011 12:58 pm

You know I was joking Ollie...
Chris

Kite Naked
Benicia Kite and Paddle Sports
4562 East 2nd Street, Unit J & K
Benicia, CA 94510

209-304-2200

http://www.kitenaked.com
Slingshot

User avatar
sc-surfer
Resident
Resident
Posts:740
Joined:Fri Apr 29, 2011 11:19 pm
Location:Santa Cruz
Contact:

Re: A Better Kiteboarding Pump

Post by sc-surfer » Wed Dec 14, 2011 8:52 pm

WindMuch wrote:Aha!
The silicone should be ok to but the propellant in the can might be harmful.
Thanks, Monte! I was wondering WTF was up with my silicone spray eating rubber seals!

What brand/product is the teflon stuff you're using? Triflow?

Kirk out
Tri-flow might be ok. We use it on bike parts some of which are plastic/rubber and seems ok. However, it's very light and won't stick to well. A grease will be better. Can't remember the name of the stuff I use. I'll try to dig it out for you.

M

User avatar
kitenaked
Old School
Old School
Posts:1836
Joined:Mon Jun 18, 2007 4:57 pm
Location:Nor Cal
Contact:

Re: A Better Kiteboarding Pump

Post by kitenaked » Wed Dec 14, 2011 8:53 pm

Pork Fat...
Chris

Kite Naked
Benicia Kite and Paddle Sports
4562 East 2nd Street, Unit J & K
Benicia, CA 94510

209-304-2200

http://www.kitenaked.com
Slingshot

User avatar
sc-surfer
Resident
Resident
Posts:740
Joined:Fri Apr 29, 2011 11:19 pm
Location:Santa Cruz
Contact:

Re: A Better Kiteboarding Pump

Post by sc-surfer » Thu Dec 15, 2011 7:24 pm

mmmmmmmm.......bacon!

User avatar
sloughslut
Resident
Resident
Posts:909
Joined:Mon Jan 21, 2008 10:15 am
Location:Benicia
Contact:

Re: A Better Kiteboarding Pump

Post by sloughslut » Thu Dec 15, 2011 10:17 pm

try this stuff
Attachments
images.jpg
images.jpg (6.3KiB)Viewed 2777 times
Riding used and closeout kites and boards from e-bay,craigslist,ikitesurf, and local surf shops.Now riding home made foils

User avatar
sc-surfer
Resident
Resident
Posts:740
Joined:Fri Apr 29, 2011 11:19 pm
Location:Santa Cruz
Contact:

A Better Kiteboarding Pump

Post by sc-surfer » Sat Dec 17, 2011 2:08 pm

Kirk,

Here's what I use. Fwiw.
Attachments
ImageUploadedByTapatalk1324156095.918831.jpg
ImageUploadedByTapatalk1324156095.918831.jpg (102.58KiB)Viewed 2753 times

Post Reply

Who is online

Users browsing this forum: No registered users and 15 guests