Kite "Jellyfishing"

Post general kiteboarding discussion topics here!
Post Reply
User avatar
OliverG
Old School
Old School
Posts:5326
Joined:Sat Feb 07, 2004 5:03 pm
Location:Oakland, CA
Contact:
Kite "Jellyfishing"

Post by OliverG » Sat Mar 20, 2004 8:21 pm

I've got some 2002 Wipika Airblasts (12,14,16 flat) and the 12 and 16 fly rock solid, but the 14 tends to "jellyfish". I know it's inherent with that particular year and size kite, but what's the deal? Anyone have any insight on why some kites do this and what you can do to help correct it?

Greg
Old School
Old School
Posts:3516
Joined:Fri Mar 05, 2004 6:45 pm
Contact:

Post by Greg » Sat Mar 20, 2004 9:37 pm

The easyest way to stop jellyfishing is to buy a Naish!
L.M.G.

User avatar
OliverG
Old School
Old School
Posts:5326
Joined:Sat Feb 07, 2004 5:03 pm
Location:Oakland, CA
Contact:

Post by OliverG » Sat Mar 20, 2004 10:50 pm

C'mon, but really now....haha. Got any useful information? It's just the 10.0 (14flat), the others are fine.

User avatar
charlie
Old School
Old School
Posts:1254
Joined:Fri Mar 05, 2004 7:15 am
Location:alameda calif
Contact:

Post by charlie » Sun Mar 21, 2004 7:42 am

ollie
my older b t do that
i found adding a little back line tention helped
also look at the tips when flying see how it flares in or out
that might give you a clue as too what might help
i read something about line setup
remember last mouth i told you iadded more tention on the back line and got mine to not jellyfish soooo much
charlie

tim_fred
Contributor
Contributor
Posts:11
Joined:Sat Mar 06, 2004 11:59 pm
Location:SF
Contact:

Post by tim_fred » Sun Mar 21, 2004 12:58 pm

Jellyfishing is caused by aerodynamic instability in the tips of the kite coupled with not enough rigidity in the LE tube.

Newer (2003+) kites are more likely to do it because kite designers are pushing the boundaries of the designs. Sometimes too far. Smaller tubes mean more efficient airfoil (better upwind pointing) but less rigidity. More unstable tips mean faster turning with less bar pressure.

Like Charlie said, adding back line tension will increase stability in the tips, as will moving the front attach points back - both at the expense of depower and upwind-ability. Pumping the kite up really hard can add stiffness. If you have a pump with a gauge try 6.5-8 psi.

-Tim

f
Contributor
Contributor
Posts:20
Joined:Wed Apr 28, 2004 12:39 pm
Location:Oakland
Contact:

Post by f » Wed Apr 28, 2004 8:15 pm

tim_fred wrote:If you have a pump with a gauge try 6.5-8
... and if you don't own such a pump: There was a thread on a different forum that describes how you can do it yourself. Looks pretty straight forward to me. Lots of text.... just go to the pics:
http://f2.pg.photos.yahoo.com/xy752001

This is the thread:
http://www.kiteforum.com/index.php?page ... tton=forum

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 67 guests