Kite line diameter and cam cleats

Post general kiteboarding discussion topics here!
Post Reply
User avatar
jwest21
SFBA Member
SFBA Member
Posts:406
Joined:Wed Jun 01, 2011 2:12 am
Location:San Francisco
Contact:
Kite line diameter and cam cleats

Post by jwest21 » Tue Oct 02, 2012 10:52 am

I'm working on an idea and trying to find a suitable cam cleat that would fit the tiny diameter of typical kite line for kitesurfing.

So far I have found a cam cleat that can be used with line as small as 2-6mm but I'm pretty sure some kite lines go all the way to about 1mm in diameter, but more typically are 1.5-2.5mm. Any veteran sailors got any idea where I could find a micro-mini-über-tiny cam cleat, or if my diameter estimates are off and could go with what I've already found.

User avatar
sc-surfer
Resident
Resident
Posts:740
Joined:Fri Apr 29, 2011 11:19 pm
Location:Santa Cruz
Contact:

Kite line diameter and cam cleats

Post by sc-surfer » Tue Oct 02, 2012 11:48 am

In my experience a cam cleat for something that small will not be a good idea. The amount of force required to hold will be extremely high and the amount of material to grab is so small that it will be crushed and damaged quickly. Line that small is more fragile simply because it has fewer fibers no 'squish'.

Just my $0.02

yojimbo
Regular
Regular
Posts:603
Joined:Fri Apr 20, 2007 10:11 pm
Location:sonoma
Contact:

Re: Kite line diameter and cam cleats

Post by yojimbo » Tue Oct 02, 2012 1:56 pm

It might be possible to beef up the portion of the line that will land in the cleat to increase its diameter by sewing a sleeve onto that portion of the line. Also the ends of those mini cleats look like they touch each other, so in theory they would hold a 1mm line.

JRaut
Valued Contributor
Valued Contributor
Posts:66
Joined:Tue Jun 05, 2012 8:22 pm
Location:Mission
Contact:

Re: Kite line diameter and cam cleats

Post by JRaut » Tue Oct 02, 2012 6:09 pm

Maybe try a jam cleat instead of a cam cleat?

They tend to work better for smaller diameter lines.
http://www.willieboats.com/store1/image ... 0Cleat.jpg

J

JRaut
Valued Contributor
Valued Contributor
Posts:66
Joined:Tue Jun 05, 2012 8:22 pm
Location:Mission
Contact:

Re: Kite line diameter and cam cleats

Post by JRaut » Tue Oct 02, 2012 9:19 pm

(I know, a jam cleat is not nearly as attractive as a cam cleat, but they really do work. Really. And they don't chafe as much on small-diameter lines because the force is spread out over, say, 5 points rather than just one with the cam cleat.)

User avatar
jwest21
SFBA Member
SFBA Member
Posts:406
Joined:Wed Jun 01, 2011 2:12 am
Location:San Francisco
Contact:

Post by jwest21 » Tue Oct 02, 2012 11:09 pm

Thanks for the input guys. A jam cleat may work, I'll see if I can change my designs around a little to use one instead.

User avatar
buckidge
Valued Contributor
Valued Contributor
Posts:269
Joined:Fri Oct 30, 2009 11:27 pm
Contact:

Re: Kite line diameter and cam cleats

Post by buckidge » Wed Oct 03, 2012 7:34 am

So... What's the idea you're working on?

Sent from my DROID BIONIC using Tapatalk 2
"A ship is safe in harbor, but that's not what ships are built for"

User avatar
jwest21
SFBA Member
SFBA Member
Posts:406
Joined:Wed Jun 01, 2011 2:12 am
Location:San Francisco
Contact:

Post by jwest21 » Wed Oct 03, 2012 9:20 am

I'll let you know when it's patented ;)

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 65 guests