Wall mounting a kiteboard?

feixaq · Post by **feixaq** » Mon Oct 18, 2004 1:46 pm

Sorry if this post is a little off-topic, but... I am in the process of redesigning my home, and am thinking about mounting a kiteboard diagonally on the wall for decorative effect when I'm not using it. However, I can't use ready-made brackets like the ones they have for snowboards because of the 1.25" fins. Does anybody have recommendations on what's the best way to go about this? Any suggestions would be greatly appreciated. Thanks!

OliverG · Post by **OliverG** » Tue Oct 19, 2004 7:12 am

Hmm, you might be able to use the kind meant for general hanging or bicycle hanging use, but I don't know that they'd be very attractive. They may come in a few different sizes. Check your local home supply center or hardware store.

feixaq · Post by **feixaq** » Tue Oct 19, 2004 9:53 am

ollie, thanks for the suggestion. i'll look around some more, but looks like i might have to do some custom woodwork or something.

OliverG · Post by **OliverG** » Tue Oct 19, 2004 2:04 pm

I didn't even think about a wood rack, that's probably the best choice as you'll able to make it custom and have it look nice too. Maybe use Cherry or some cool hardwood.

cmcconn007 · Post by **cmcconn007** » Thu Mar 23, 2006 2:20 pm

I wakwboard as well and as that sport is more mainstream and there are tons of aftermarket towers, poles, and board racks you may be able to find one that would work. Wakeboards have fins, some removable, some molded in.

A silly and fun way to mount it would be have a couple of fake feet sticking out of the wall and just hang the bindings on the feet.

good luck

Pablito · Post by **Pablito** » Thu Mar 23, 2006 4:49 pm

You could cut holes in the wall where the fins are. :mrgreen:

gomez72 · Post by **gomez72** » Thu Mar 23, 2006 8:57 pm

Check out surf shop, or the back of surfing magazines.
Thay will have tons of addsfor wood surfboard hanger.
Or if you have acces to a wood shop you can make them really easy.

windhorny · Post by **windhorny** » Thu Mar 23, 2006 9:58 pm

I have actually made some out of aluminum or stainless before. Feel free to call me if you want some custom ones made up.

Yuri
Metalmorphic
510-638-4482
www.metalmorphiconline.com

VanSimms · Post by **VanSimms** » Fri Mar 24, 2006 5:20 pm

Are you trying to mount it with the straps tward the wall or away from it
I made something like this for mounting with the straps facing the wall, if thats how you want it, I can post pics.
-Evan

narly1 · Post by **narly1** » Fri Mar 24, 2006 5:33 pm

i use 2x4s with i/2 dowels
my boards slide in at a 45
it takes two 2x4s about 3 feet long ,mounted like rails about 4 feet off the floor on a wall.spaced about foot strap apart.
if you lay it out nice you can get about 4 boarsds on it .
that would be about 8, 1/2 inch dowles about 3/4 of the withd of your boards say 10 to 12 inchs long drilled at a 45 into the 2x4s

cheep ,fast to build if you have a drill and 1/2 argger bit ?

course if in dought, blast that board on the wall with a nail gUn anD Be DoNe.

also use one rail, with dallowes all over to hold my frist line of kites.
(i want to air dry ,not sit in puddle?)

BayAreaKiteboarding.com

Wall mounting a kiteboard?

how about using wakeboarding clips or board holders

Who is online